If you are sending in your own unit for refurbishment it is vital the pump be reasonably packaged for shipment as they weigh 12-16lbs and will be damaged in transit if care is not taken.
Yes. Depending on current inventory levels, physical condition and rarity of the unit in question. Purchase price varies accordingly.
Yes, on nearly all units a core charge is required if not sending one in ahead of time. This core charge will be refunded in full upon receipt of a rebuildable core. Units with especially bad rust, severe impacts or blooming corrosion in the aluminum castings are not considered rebuildable and should be discussed prior to purchase of an refurbished pump.
Cores are essential to ongoing refurbishment work, each one gives parts and components to others. If you don't have the core or cannot return it this must be discussed upfront. If you fail to return the core in the specified period warranty will be invalidated on the refurbished unit.
Keep your "ABS" electrical shroud but send its retaining screw
Keep your both relays.
Keep your rubber mounting isolators
Send everything else!
Most pumps are shipped in a double walled 12x9x9 cardboard carton and packed securely in Instapak expanding foam liners. These cartons are suitable for reuse to return the core.
Yes, absolutely. While the cost varies, and can often be on the expensive side after tax/duty is accounted for I have units in Puerto Rico, Australia, United Kingdom, Denmark, Iceland, Norway, and the Czech Republic to name a few!
Copyright © 2022 MTechnique ABS- All Rights Reserved.
BOSCH is a registered trademark of Robert Bosch GmbH, Germany.
E23, E24, E28, E30, E31, E32, E34, M3 & M5 are registered trademarks of BMW AG, Munich, Germany.
911, 928, 944, 951, 964, 968 & Porsche are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
Use of these trademarks is for identification and compatibility clarification only.